Technical Specifications
|
Parameter |
Specification |
|---|---|
|
Standard |
DIN 6799-2017 |
|
Type |
E-Clips |
|
Shaft Diameter |
1–42 mm |
|
Material |
C67S / C75S Spring Steel |
|
Thickness (S) |
0.20–2.50 mm |
|
Groove Diameter (d2) |
0.8–30 mm |
|
Hardness |
460–580 HV / 46–54 HRC |
|
Surface Treatment |
Phosphating / Zinc Coating / Custom |
|
Installation |
Radial Mounting |
E-Clip Structural Design & Retaining Mechanism
- Open E-Shaped Profile: DIN 6799 E-Clips feature an open E-shaped profile with three curved contact sections. This geometry allows the clip to engage with a shaft groove while providing axial restraint for mounted components.
- Radial Installation Structure: Unlike closed retaining rings that require axial installation, E-Clips can be fitted radially onto a shaft. Their open design allows installation without accessing the shaft end.
- Contact with Shaft Groove: Once installed, the inner contact sections engage with the groove, while the outer profile provides a retaining surface for adjacent components. Correct engagement is necessary to prevent the clip from becoming displaced during operation.
- Compact Retaining Design: The low-profile structure requires limited axial space, making E-Clips suitable for assemblies where a compact retaining component is needed.

DIN 6799 E-Clips can be supplied in different sizes and configurations to match specific shaft designs and assembly requirements. For customized orders, customers can provide technical drawings, dimensional specifications, or reference samples for evaluation.
- Dimensional Requirements: Custom sizes or non-standard dimensions can be reviewed based on shaft diameter, groove dimensions, clip thickness, and installation clearance.
- Material Selection: C67S and C75S spring steel options can be evaluated according to the required mechanical properties and application conditions.
- Surface Finish: Surface treatment options can be discussed based on corrosion protection, appearance, and assembly requirements.
- Packaging & Identification: Individual size labeling, batch identification, and customized packaging can be arranged for bulk orders and inventory management.

Retaining Force & Mechanical Performance

- Axial Retaining Capacity: The E-Clip provides resistance against axial movement by engaging with the shaft groove. Its retaining capacity depends on the clip size, material properties, and groove geometry.
- Elastic Deformation: Spring steel allows the clip to undergo controlled deformation during installation. The material and heat-treatment condition influence its ability to maintain the required spring characteristics.
- Load Distribution: The contact between the clip and groove influences how axial loads are transferred to the shaft. Proper groove machining and full clip engagement help avoid localized stress caused by incorrect fitting.
- Size-Dependent Performance: Retaining force varies across different nominal sizes and should be evaluated using the relevant standard specifications rather than applying one load value to the entire product range.
FAQ
Can you provide samples before placing a bulk order?
Sample arrangements can be discussed before mass production. This allows customers to check product dimensions, material suitability, and assembly compatibility before confirming a larger order.
Do you support OEM orders for DIN 6799 retaining washers?
Yes. OEM orders can be evaluated based on customer drawings, specified materials, surface finishes, and packaging requirements. Customized product identification can also be discussed.
Can you provide material or inspection documents with the shipment?
Material certificates and inspection reports can be discussed according to the order requirements. Please specify the required documentation when requesting a quotation.
Hot Tags: din 6799 e-clips, China din 6799 e-clips manufacturers, suppliers, factory, e clip shaft retainers, E Retaining Ring, E Type Retaining Ring, heavy duty e clips, Shaft E Clip, Stainless Steel E Clips

