Technical Parameters
|
Parameter |
Specification |
|---|---|
|
Standard |
DIN 472-2017 |
|
Type |
Normal Type / Heavy Type |
|
Nominal Bore Diameter (d1) |
8–300 mm (Normal) / 20–100 mm (Heavy) |
|
Ring Thickness (s) |
0.8–5.0 mm (Normal) / 1.5–4.0 mm (Heavy) |
|
Ring Diameter (d3) |
8.7–315 mm (Normal) / 21.5–105.5 mm (Heavy) |
|
Maximum Dimension (a max) |
2.4–16.2 mm (Normal) / 4.5–10.5 mm (Heavy) |
|
Approximate Dimension (b) |
1.1–16.0 mm (Normal) / 2.4–8.4 mm (Heavy) |
|
Minimum Dimension (d5) |
1.0–5.0 mm (Normal) / 2.0–3.5 mm (Heavy) |
|
Groove Diameter (d2) |
8.4–308 mm (Normal) / 21.0–103.5 mm (Heavy) |
|
Groove Dimension (d4) |
3.0–9.0 mm (Normal) / 2.25–6.0 mm (Heavy) |
|
Hardness |
40–54 HRC (Normal) / 44–54 HRC (Heavy) |
|
Unit |
mm |
Ring Geometry & Bore Groove Compatibility
Internal Circlips are designed with specific ring dimensions to fit internal grooves machined into bores and housings. The relationship between the nominal bore diameter, ring outer diameter, ring thickness, and groove dimensions determines the installation fit and retaining position.
01. Nominal Bore Diameter (d1)
The nominal bore diameter identifies the housing or bore size matched to the retaining ring. Each specification corresponds to a defined dimensional range under DIN 472-2017.
02. Ring Outer Diameter (d3)
The outer diameter defines the external profile of the circlip. Its dimensions determine how the ring engages with the internal groove after installation and expansion.
03. Ring Thickness (s)
Ring thickness determines the axial space occupied by the circlip inside the groove. It must correspond to the specified groove width to maintain the intended retaining position.
04. Groove Diameter (d2)
The groove diameter defines the internal seating geometry of the housing. Its dimensional accuracy affects how the circlip fits into the machined groove and maintains contact with the groove surface.
Material Selection & Heat Treatment
Material selection and heat treatment influence the mechanical properties and dimensional stability of DIN 472 Internal Circlips. The finished ring must maintain sufficient hardness and elastic characteristics to accommodate contraction during installation and expansion into the internal groove.
01. Carbon Spring Steel
Carbon spring steel is commonly selected for its strength and spring characteristics. It provides the mechanical properties required for the ring to contract during installation and recover toward its original shape after positioning.
02. Stainless Steel
Stainless steel options are available for applications requiring improved corrosion resistance. Material grade selection should consider the required hardness, spring properties, and operating environment.
03. Heat Treatment Process
Heat treatment is used to develop the required hardness and mechanical characteristics of the finished ring. Process control helps maintain the balance between strength and elastic deformation during installation.
04. Hardness Control
Hardness requirements vary according to the ring type and dimensional range specified in DIN 472-2017. Finished products are checked against the applicable requirements rather than a single universal hardness value.

DIN 472 Internal Circlips Manufacturer
Anhui Pins manufactures DIN 472 Internal Circlips in Normal Type and Heavy Type configurations for different bore sizes. Products are supplied according to DIN 472-2017 dimensional specifications, with options for material selection, surface treatment, and order-specific requirements.
- Standard Specifications: Normal Type and Heavy Type Internal Circlips.
- Material Options: Carbon Spring Steel and Stainless Steel.
- OEM Customization: Specified materials, surface finishes, and packaging.
- Quality Control: Dimensional inspection, hardness testing, and finished product verification.
Customization for DIN 472 Internal Circlips
Anhui Pins supports customization of internal retaining rings according to customer drawings, application requirements, and order specifications. Customization can cover material selection, dimensional requirements, surface finishes, and packaging arrangements.
01. Material Customization
Selection of specified steel grades according to mechanical properties and corrosion resistance requirements.
02. Dimensional Customization
Production based on approved drawings or specified dimensions when non-standard requirements are involved.
03. Surface Finish Customization
Surface treatment options can be selected according to corrosion protection, appearance, and application requirements.
04. Packaging Customization
Labels, product identification, bag quantities, and carton packaging can be arranged according to customer requirements.

FAQ
Can DIN 472 Internal Circlips be supplied according to customer drawings?
Yes. Anhui Pins can review customer drawings and technical specifications for non-standard requirements. Drawing review is recommended before quotation to confirm manufacturing feasibility and dimensional requirements.
Can you provide samples for evaluation before bulk purchasing?
Sample arrangements can be discussed before placing a production order. Buyers can use samples to check assembly compatibility and confirm the specified product requirements before proceeding with larger quantities.
Can DIN 472 be replaced by another internal retaining ring standard?
Replacement depends on the dimensional specifications of the alternative standard. Differences in ring geometry, groove requirements, and tolerances may affect interchangeability. A technical drawing comparison is recommended before substitution.
Do you support repeat orders with consistent specifications?
Yes. Previous order specifications can be referenced for repeat purchasing, helping maintain consistency in product identification, material requirements, packaging, and order documentation.
Hot Tags: din 472 internal circlips, China din 472 internal circlips manufacturers, suppliers, factory, DIN 472 Internal Circlip, imperial internal circlips, internal circlip fasteners, internal circlips with lugs, internal retaining ring retainers, Steel Internal Circlip

